BEARPHITE mixes and shapes metal powders such as copper or iron powder with added graphite powder, and then fuses the compacted powder through sintering to give it strength. After that, it is immersed in an oil tank and the entire pore space is filled with oil through capillary action on the surface and inside of the bearing.
BEARPHITE (sintered oil bearing)
Main features:
1. Due to its porous metal structure, it has excellent lubricant retention and circulation functions;
2. Stable lubrication performance ensures long service life and wide operating temperature range;
3. A wide range of materials, such as copper, iron, and stainless steel;
4. Various lubricants such as mineral oil, synthetic oil, and liquid lubricating grease can be matched;
5. Realize high density and strength through the development of molding methods and materials.
Use case:
Dynamic pressure BEARPHITE
Sintering oil containing bearings using fluid dynamic pressure technology
Main features:
1. A dynamic pressure bearing with fishbone shaped grooves set on the inner diameter surface of a sleeve shaped sintered oil containing bearing;
2. Due to the influence of fluid mechanics, high-precision, non-contact support is provided for the shaft;
3. Due to the high rigidity of the bearing, it can effectively suppress the vibration caused by unbalanced load;
4. Has lubricating oil and excellent sintering resistance;
5. It can also be manufactured in the form of thrust.
Use case:
BEAREE (resin material)
NTN's BEAREE is a sliding material that adds wear resistance and low friction properties to engineering plastics or super engineering plastics through special fillers.
Main features:
1. Has the characteristics of low friction and low wear;
2. Can be used in special environments (water, chemicals);
3. Lightweight and an ideal alternative to metals;
4. Injection molding provides design freedom.
Use case:
2024 October 4th Week Marginal Product Recommendation:
MG-EPB5Z Plastic Plain Bearings：
MG-EPB5Z Plastic Plain Bearings It is a high load material with excellent low friction factor. Marginal load application is acceptable and it is with good wear resistance both for hard and soft shafts. Continuous working temperature: -100℃～250℃; High load capacity; Higher speed is permissible; Marginal pressure is permissible; Best performance for oscillating movement.
https://www.marginalbearings.com/plastic-plain-bearings/mg-epb5z-plastic-plain-bearings.html
