BEARPHITE mixes and shapes metal powders such as copper or iron powder with added graphite powder, and then fuses the compacted powder through sintering to give it strength. After that, it is immersed
Due to the periodic suction, compression, and discharge of the compressor, the force acting on the main bearing also varies periodically with the position of the piston. The structural form of the hor
Sliding bearings are generally used under low-speed and heavy load conditions. The following are the precautions for installing sliding bearings: Pay attention to the smooth flow of the oil circuit an
1. Preparation work before casting alloy When the tile lining is severely detached from the tile bottom and the alloy damage on the tile lining surface cannot be repaired by local welding, the bearing
In the early days of railway freight cars in China, sliding bearing axle box devices were mainly composed of axle box bodies, axle box covers, bearing shells, bearing pad plates, lubrication devices,
1. Partial welding repair method for tile lining Partial welding repair may be considered for bearing shells with the following defects. 1) The newly poured bearing shell is overall good, but there ar
Repair method one for sliding bearings of high-voltage motors: recast alloy repair method 1. Preparation work before casting alloy When the tile lining is severely detached from the tile bottom and th
Abstract: Ice machine is a device that uses the easy compressibility and liquefaction of ammonia gas for refrigeration, commonly used in the chemical and pharmaceutical fields. This article carefully
LanguageLanguage