The main alloy components of commonly used bearing alloys (also known as Babbitt alloys or white alloys) are tin, lead, antimony, and copper. Antimony and copper are used to improve the strength and h
Bearing is an important component in contemporary mechanical equipment. The difference between imported bearings and domestic bearings is that the material of imported bearings is better than domestic
BEARPHITE mixes and shapes metal powders such as copper or iron powder with added graphite powder, and then fuses the compacted powder through sintering to give it strength. After that, it is immersed
(1) Development of Global Dynamic Pressure Oil Film Sliding Bearing Subdivision Field Based on its strong load-bearing capacity, resistance to impact and vibration, dynamic pressure oil film sliding b
Due to the periodic suction, compression, and discharge of the compressor, the force acting on the main bearing also varies periodically with the position of the piston. The structural form of the hor
Sliding bearings are generally used under low-speed and heavy load conditions. The following are the precautions for installing sliding bearings: Pay attention to the smooth flow of the oil circuit an
1. Preparation work before casting alloy When the tile lining is severely detached from the tile bottom and the alloy damage on the tile lining surface cannot be repaired by local welding, the bearing
In the early days of railway freight cars in China, sliding bearing axle box devices were mainly composed of axle box bodies, axle box covers, bearing shells, bearing pad plates, lubrication devices,
1. Partial welding repair method for tile lining Partial welding repair may be considered for bearing shells with the following defects. 1) The newly poured bearing shell is overall good, but there ar
Repair method one for sliding bearings of high-voltage motors: recast alloy repair method 1. Preparation work before casting alloy When the tile lining is severely detached from the tile bottom and th
LanguageLanguage