Sliding Bearing

MG-800 系列双金属轴套、轴瓦、止推垫片，以优质低碳钢为基体，表面烧结青铜粉，适用于高载低速下的旋转，摇摆运动。具有摩擦系数低、耐磨性能好、使用寿命长、抗咬合性能好等特点，铜合金层可根据要求加工出各种类型的油穴、油槽。产品被广泛应用于矿山机械、汽机车、建筑机械、农用机械、轧钢机械等。 MG-800 Bimetallic self-lubricating bearing uses high

This new material uses the PTFE fibre fabric overlay on steel backing, the fabric is with high load capacity and much longer operating life comparing with conventional 3-layer bushes.

MG-1A is a composite material of PTFE compound tape on aluminum shell, the PTFE is tape up to 0.20 mm thickness, enabling the bearing can be sized after being fixed, meanwhile the thick PTFE layer

High strength glass fiber with epoxy resin baked with PTFE and special fiber as bearing lining, the back material provides high load capacity and bearing lining ouers low friction under dry

① Polymer Lining € Provides Bearing properties, wear resistance, low friction… ② Bronze Sinter € Provides Bond & Heating Transfer ③ Metal Backing € Provides Mechanical Strength ④ Cu/Tin Plating €

MG-EPB5Z Plastic Plain BearingsIt is a high load material with excellent low friction factor. Marginal load application is acceptable and it is with good wear resistance both for hard and soft

◆ Introduction: This material provides a maintenance free and low friction bearing solution, particularly for high load and intermittent oscillating motion. Solid lubricants within the bronze combine

MG-090 bronze self-lubricating bearings use a kind of high density bronze alloy of special compositions as backing, the surface of alloy is rolled with diamond pattern of the oil indents or half ball

1. Made of high anti-wear material EPB13;2.Maintenance-free, self lubricating; 3. Chemical resistant;4. Dust resistant and quit running;5. Installation by force fitting;6. The E10 inner tolerance

The self-lubricated bearing is developed specially for the metal plate fitting. It is made with the Marginal-EPB3M material which is good at shock absorbtion and wear resistance. Alternative material

1.Maintenance free, self-lubricated .2.The self-lubricated bearing is developed specially for the metal plate fitting.It is good at shock absorbtion and wear resistance. Alternative material Marginal