Sliding Bearing

Marginal thrust washer consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining with reliable quality.

Self lubricating flanged bushing consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. It features the excellent ratio between cost and performance

Marginal strip can work for a long time without oil in the condition of prelubricated with lubrication indents design. It is widely applied in metallurgy machinery, mining machinery, water

This material provides a maintenance free and low friction bearing solution, particularly for high load and intermittent oscillating motion. Solid lubricants within the bronze combine the strength of

Inch Marginal PB Bushings,free sliding bearing has good load capacity and anti-wear.It is used in high load capacities and low speed with rotating, oscillating or frequent stop-start motion.It can

Solid turned bronze bushing, heavy-maintenance,a maintenance-heavy bushing, oil or grease lubrication is necessary,suitable for applications in contaminated environment, good corrosion resistance.

MG-090 bronze self-lubricating bearings use a kind of high density bronze alloy of special compositions as backing, the surface of alloy is rolled with diamond pattern of the oil indents or half ball

Marginal bronze bush have flanges or shoulders as options. The flange is designed to aid in mounting and positioning. Flanges are also used with bearings on external housings.

WC metric/inch Thrust washer composite bearing material consisting of 3 bonded layers; a steel backing strip bonded with a porous sinter bronze interlayer which is impregnated and overlaid with a

MG-2Y can work for a long time without oil in the condition of prelubricated with lubrication indents design. It is widely applied in metallurgy machinery, mining machinery, water conservancy

MG-800 Bimetallic self-lubricating bearing uses high quality low-carbon steel plate as backing, sintered porous bronze as its liner, suitable for rotatory oscillating, reciprocating movements in the

MG-1B bronze hydraulic bush is with a high safty factory, which is particularly appropriate for high temperature environment where oil is unsucient and where the machine has to be under successive